hz

2026-05-06 19:51:30 +07:00
commit 3958b0edcf
2704 changed files with 410390 additions and 0 deletions
@@ -0,0 +1,5 @@
+set(MCU_VARIANT nrf52840)
+set(LD_FILE_GNU ${CMAKE_CURRENT_LIST_DIR}/../../linker/nrf52840_s140_v6.ld)
+
+function(update_board TARGET)
+endfunction()
@@ -0,0 +1,57 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2020, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+/* metadata:
+   name: Adafruit CLUE
+   url: https://www.adafruit.com/product/4500
+*/
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define _PINNUM(port, pin)    ((port)*32 + (pin))
+
+// LED
+#define LED_PIN               _PINNUM(1, 1)
+#define LED_STATE_ON          1
+
+// Button
+#define BUTTON_PIN            _PINNUM(1, 02)
+#define BUTTON_STATE_ACTIVE   0
+
+// UART
+#define UART_RX_PIN           4
+#define UART_TX_PIN           5
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */
@@ -0,0 +1,13 @@
+MCU_VARIANT = nrf52840
+CFLAGS += -DNRF52840_XXAA
+
+# All source paths should be relative to the top level.
+LD_FILE = hw/bsp/nrf/linker/nrf52840_s140_v6.ld
+
+$(BUILD)/$(PROJECT).zip: $(BUILD)/$(PROJECT).hex
+	adafruit-nrfutil dfu genpkg --dev-type 0x0052 --sd-req 0xFFFE --application $^ $@
+
+# flash using adafruit-nrfutil dfu
+flash: $(BUILD)/$(PROJECT).zip
+	@:$(call check_defined, SERIAL, example: SERIAL=/dev/ttyACM0)
+	adafruit-nrfutil --verbose dfu serial --package $^ -p $(SERIAL) -b 115200 --singlebank --touch 1200