hz

2026-05-06 19:51:30 +07:00
commit 3958b0edcf
2704 changed files with 410390 additions and 0 deletions
@@ -0,0 +1,67 @@
+
+/* metadata:
+   name: STM32 F303 Discovery
+   url: https://www.st.com/en/evaluation-tools/stm32f3discovery.html
+*/
+
+#ifndef BOARD_H
+#define BOARD_H
+
+#define LED_PORT              GPIOE
+#define LED_PIN               GPIO_PIN_9
+#define LED_STATE_ON          1
+
+#define BUTTON_PORT           GPIOA
+#define BUTTON_PIN            GPIO_PIN_0
+#define BUTTON_STATE_ACTIVE   1
+
+
+/**
+  * @brief  System Clock Configuration
+  *         The system Clock is configured as follow :
+  *            System Clock source            = PLL (HSE)
+  *            SYSCLK(Hz)                     = 72000000
+  *            HCLK(Hz)                       = 72000000
+  *            AHB Prescaler                  = 1
+  *            APB1 Prescaler                 = 2
+  *            APB2 Prescaler                 = 1
+  *            HSE Frequency(Hz)              = 8000000
+  *            HSE PREDIV                     = 1
+  *            PLLMUL                         = RCC_PLL_MUL9 (9)
+  *            Flash Latency(WS)              = 2
+  * @param  None
+  * @retval None
+  */
+static inline void SystemClock_Config(void) {
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+  RCC_PeriphCLKInitTypeDef RCC_PeriphClkInit;
+
+  /* Enable HSE Oscillator and activate PLL with HSE as source */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  /* Configures the USB clock */
+  HAL_RCCEx_GetPeriphCLKConfig(&RCC_PeriphClkInit);
+  RCC_PeriphClkInit.USBClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
+  HAL_RCCEx_PeriphCLKConfig(&RCC_PeriphClkInit);
+
+  /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
+  clocks dividers */
+  RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
+
+  /* Enable Power Clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+}
+
+#endif